Reverse Osmosis Water Filters
FILTRATION AT A GLANCE
What RO filtration does.
Carbon stages prepare the water, the reverse osmosis membrane treats selected dissolved substances, and finishing cartridges complete the process.
The stage sequence and final treatment depend on the system you choose.
Taste and odour
- ✓Unwanted tastes
- ✓Unwanted odours
Before the membrane
- ✓Carbon treatment for chlorine
- ✓Sediment pre-filter on 4, 5 & 6 Stage models
Reverse osmosis
- ✓RO membrane filtration
- ✓Selected dissolved substances
Finishing options across the range
- ✓Carbon taste polishing
- ✓Alkaline remineralisation
- ✓Hydrogen finishing
- ✓Dedicated drinking-water tap
Finishing options vary by model. For a specific contaminant, ask for the supplied system’s performance data and rated capacity.
HOW IT WORKS
Product configuration.
This example shows the 5 Stage Standard RO sequence. A storage tank holds the treated water for your dedicated drinking-water tap.
Enquire about an RO system →5 STAGE STANDARD RO · STAGE ORDER
- 1
Sediment - 2
Carbon - 3
Carbon - 4
RO membrane - 5
Carbon polish
Cold supply → pre-filters → RO membrane → storage tank → final polish → drinking-water tap
The membrane also sends a separate concentrated water stream to the drain. Numbered stages match the descriptions below.
- 1
Sediment filtration
Captures suspended particles such as dirt, sand and rust.
- 2
First carbon stage
Helps reduce chlorine before the water reaches the membrane.
- 3
Second carbon stage
Provides further carbon treatment for taste, odour and selected organic substances.
- 4
Reverse osmosis membrane
Separates selected dissolved substances from the water. Rejected water is directed to the drain.
- 5
Final carbon polishing
Finishes the taste and odour of the stored RO water before dispensing.
COMPARE THE STAGE SEQUENCES
Choose your RO finish.
Explore the filtration stages in each system, from carbon-polished drinking water to alkaline and hydrogen options.
3 Stage RO
Carbon-polished finish
A three-stage sequence with carbon treatment before the membrane and a final taste-polishing cartridge.
- Carbon block
- RO membrane
- Coconut carbon polish
4 Stage Alkaline RO
A mineral finishing stage
Sediment and carbon treatment, followed by reverse osmosis and an alkaline mineral cartridge.
- Sediment
- Carbon
- RO membrane
- Alkaline remineraliser
5 Stage Standard RO
Two carbon pre-filters
Three pre-filters prepare the water for reverse osmosis. The final carbon cartridge polishes taste and odour.
- Sediment
- First carbon
- Second carbon
- RO membrane
- Carbon polish
5 Stage Alkaline RO
RO with remineralisation
The five-stage alkaline model finishes with mineral media that adds selected minerals back to the water.
- Sediment
- First carbon
- Second carbon
- RO membrane
- Alkaline remineraliser
6 Stage Hydrogen RO
A hydrogen finishing stage
Pre-filtration, an RO membrane and carbon polishing are followed by a final hydrogen cartridge.
- Sediment
- First carbon
- Second carbon
- RO membrane
- Carbon polish
- Hydrogen finish
INSTALLATION & SERVICING
Support from installation onwards.
Call us and we’ll ask a few installation questions over the phone to understand what work is involved.
For an existing RO system, our team can help identify the correct replacement cartridges and membrane, and arrange servicing.

RO QUESTIONS
Your questions, answered.
Do more stages always mean better filtration?
Each stage has a different job. Compare the membrane, pre-filters and finishing cartridge against what you want from your drinking water.
What changes between standard, alkaline and hydrogen?
Standard RO finishes with carbon polishing. Alkaline models use mineral media, while the 6 Stage model adds a hydrogen finishing cartridge.
When do the filters need replacing?
Follow the schedule for your model. Replacement intervals depend on the cartridge, membrane, incoming water and household use. Our servicing team can help.
Find your RO system.
Talk to our team about the right stage configuration for you.
